ALL PRE/POST - CL, QL, TF, M7CL, LS9

How do I change the MIX1 (AUX1) to POST all input channels at once ?

CL, QL, M7CL, LS9:
Open the MIX SEND popup by pressing the TO MIX1 SEND LEVEL knob in the selected channel or overview screen. In the popup screen, you have "ALL PRE" and "ALL POST" button on the upper right corner.


TF series:
Select Output fader bank and select AUX1. Touch on the top of the channel strip to open SEND FROM screen. Press the [Menu] key below the screen and select All Pre or All Post command from the menu.

V3.01 for CL and QL series

V3.01 firmware for CL series and QL series were released last week.
They have some of minor but important fixes. Please find them on their download page.

CL firmware download page
QL firmware download page

Shaun

Fader calibration

Faders on my console have chattering (vibrate when they are moved with a scene recall). Do they need to be serviced?

Usually, friction of a slider will be changed after running the console for several months, which depends on usage, environment, frequency of scene recalling, etc. Or the faders might have much dust inside. These may cause overshooting of fader position control. Please try Fader Calibration function of the console before contacting Yamaha service.

Please don't use any contact cleaner. It will remove special contact grease in a fader and make the situation worse.

(CL series and M7CL) While holding down the SCENE MEMORY [STORE] key of the panel, turn on the power. Press the FADER CALIBRATION button and follow the instruction in the screen.

(QL series) While holding down [SEL] key of master B, turn on the power. Press the FADER CALIBRATION button and follow the instruction in the screen.

(TF series) While holding down [Home] key under the LCD touch panel, turn on the power. Press the Fader Calibration button and follow the instruction in the screen.

(PM5D) While holding down the [ENTER] key of the panel, turn on the power of the PW800W power supply. Select "CALIBRATE FADER POSITION" and follow the instruction in the screen.

(LS9) While holding down the [SCENE MEMORY] key of the DISPLAY ACCESS section, turn on the power. Move the cursor to the FADER CALIBRATION button and press the [ENTER] key.

Updated on April 20, 2015 with QL and TF series.

V3 firmware for CL/QL series released

The new firmware is released with new StageMix and R Remote software.
This is a big step for the mixers. Now, you can use Dugan mixer on your CL. PEQ in output channel is expanded to 8-band on these mixers. RTA is also available in their PEQ and GEQ screen.
And what I really like is RTA on StageMix. It uses iPad microphone and is independent from the RTA on a console. This is very useful when you are checking speakers on stage.

List of features can be found here.
Please visit Download page for CL or QL.

Shaun

Engineers behind the new consoles, QL5 and QL1

We've just announced the new consoles at PL+S show in Frankfurt.
Please welcome my friends who have developed the new QL1 and QL5!!